| 
 | 
              
          
          Radiation  Response Kit 2241-2RK
          
             
               
                 
                    
                Call for Availability 
               | 
               
                Radiation
                        Survey Kit 2241-2RK 
                  
                  
- 2 Complete Detector Setups  
- Auto-ranging Digital Display  
- Display in CPM and mR/hr  
- Model 44-9 Pancake Alpha Beta Gamma Detector -  
ideal for frisking individuals & screening
packages, vehicles, etc. 
- Model 44-2 Gamma Scintillator Detector  
- All items come in a rugged Pelican protective case 
- Training Video Available - no extra charge, upon request 
- 1 Year Factory Warranty 
- Free Calibration Training Course 
provided at the factory (2 - 3 days) 
Response Kit 2241-2RK - includes: 
- Model 2241-2 Detection Unit 
- Model 44-9 Pancake Detector 
- Model 44-2 Gamma Scintillator Detector  
- Rugged Pelican protective case 
 
Call for discounted government & law
enforcement  
& 
quantity pricing, or fax your RFQ/ITB 
               | 
             
             
               
                 
               | 
             
           
          
          
            
              DETECTORS: Model 44-9 Pancake
                  G-M, Model 44-2 Gamma Scintillator 
            DET1/DET2: A locking toggle switch to allow for
            quick change between two detector setups 
            CONNECTOR: Series "C" (others available
            on request) 
            AUDIO: Built in unimorph speaker with ON/OFF switch
            (greater than 60 dB at 2 feet) 
            ALERT/ALARM: Indicated by enunciator on display
            and audible tone 
            DISPLAY: 4 digit LCD display with 0.5"(1.3cm)
            high digits, separate enunciators for display units, alert, alarm,
            low battery, detector overload, counting overflow, and scaler counting 
            BACKLIGHT: Push-button to activate  
            RATEMETER: Can display in R/hr, Sv/hr, cpm, or cps
            when control switch is in RATEMETER position 
            DISPLAY RANGE: Auto ranging from 0.0 R/hr - 9999
            R/hr; 0.000 Sv/hr - 9999 Sv/hr; 0 cpm - 999k cpm; or 0 cps - 100k
            cps 
            LINEARITY: Reading within plus or minus 10% of true
            value with detector connected 
            SCALER: Activated by push-button in handle (count
            time adjustable from 1 - 9999 seconds in 1 second intervals)  
            CALIBRATION CONTROLS: Accessible from front of instrument
            (protective cover provided) 
            HIGH VOLTAGE: Adjustable from 200 - 2500 volts 
            DISCRIMINATOR: Adjustable from 2 - 100 mV 
            OVERLOAD: Indicated by OVERLOAD on display (adjustable
            depending on detector selected) 
            RESET: Push-button to zero display, acknowledge
            and/or reset alarm 
            POWER: 2 each "D" cell batteries (housed
            in sealed compartment that is externally accessible) 
            BATTERY LIFE: Typically 200 hours with alkaline
            batteries (low battery indicated on display) 
            CONSTRUCTION: Cast and drawn aluminum with beige
            polyurethane enamel paint 
            TEMPERATURE RANGE: -4° F(-20° C) to 122° F(50° C)
            May be certified for operation from -40° F(-40° C) to 150° F(65° C) 
            SIZE: 6.5" (16.5 cm)H X 3.5" (8.9 cm)W
            X 8.5" (21.6 cm)L 
            WEIGHT: 3.5 lbs (1.6 kg) including batteries 
             
The following parameters are adjusted by removable switchboard. Once initial
setup and calibration have been completed the switchboard can be removed without
affecting normal operation of the instrument (Model 2241-2 may be ordered without
switchboard) 
              BACKLIGHT "ON" TIME: 5, 30, 60, 90,
              180, or 240 seconds for the backlight to stay "ON" when
              activated. 
              SET MINIMUM DISPLAY: Allows lower limit of auto-ranging
              display to be fixed. For example, display can be set to not show
              values less than 1 R/hr. 
              RS-232 DATA DUMP MODE: Enables or disables dump
              mode to RS-232 port. When enabled data will be dumped every 2 seconds 
              RS-232 DETECTOR SETUP MODE: Allows for detector
              parameters to be input by RS- 232 port 
              BAUD RATE: 150, 300, 600, 1200, 2400, 4800, 9600,
              or 19200 bps. 
              DEAD TIME: Adjustable from 0 - 9999 seconds 
              CALIBRATION CONSTANT: Adjustable from 0.001 -
              280 X 109 counts/display unit 
              DISPLAY UNITS: Can read in R/hr, Sv/hr, cpm, or
              cps 
              TIME BASE: Can read in seconds or minutes 
              AUDIO DIVIDE: 1, 10, 100, or 1000 events-per-click 
              RESPONSE: FIXED: FAST response time adjustable
              from approximately 2 - 50 seconds. SLOW response
              is 5 times fast setting VARIABLE: Dependent on
              number of counts present. Typical times FAST - 4 - 25 seconds, SLOW -
              4-60 seconds (All times stated from 10% to 90% of final reading) 
              RATEMETER ALERT/ALARM: Set at any point corresponding
              to pre-selected ratemeter range 
              SCALER ALARM: Adjustable from 1 - 999999 counts 
              SCALER COUNT TIME: Adjustable from 1 - 9999 seconds | 
             
           
         
     
     
 
       |